岩石的抗剪强度准则
岩石的抗剪强度准则
抗剪强度是确定抗滑力的基本参数。抗滑力的计算公式如下：
其中： | τ | - | 滑面上的抗剪强度 |
l | - | 滑面的长度 |
直线滑动可以选择以下几种抗剪强度准则：
帮助与文档
GEO5
- 在线帮助
- 在线帮助
- 使用帮助文档
- 用户界面
- 通用输入
- 规范和分析方法
- 操作指南
- 操作指南
- 土压力计算软件
- 悬臂式挡土墙设计软件
- 重力式挡土墙设计软件
- 混凝土砌块挡土墙设计软件
- 配筋砌体挡土墙设计软件
- 石笼挡土墙设计软件
- 桥台挡土墙设计软件
- 土钉边坡支护设计软件
- 深基坑支护结构设计软件
- 深基坑支护结构分析软件
- 抗滑桩设计软件
- 竖井设计软件
- 土质边坡稳定分析软件
- 岩质边坡稳定分析软件
- 加筋土式挡土墙设计软件
- 扩展基础设计软件
- Program_Patka_CPT
- Program_Patka_CPT
- SPREADFOOTINGCPT_5__SUBFORM_GEPROJEKT
- SPREADFOOTINGCPT_5__SUBFORM_PATKY_PARAMS
- SPREADFOOTINGCPT_5__SUBFORM_FIELDTESTS_CPT
- SPREADFOOTINGCPT_5__SUBFORM_FIELDTESTS_SPT
- SPREADFOOTINGCPT_5__SUBFORM_PILOTANEN_HPV
- SPREADFOOTINGCPT_5__SUBFORM_KLASIFIKACE_ZEMIN
- SPREADFOOTINGCPT_5__SUBFORM_PROFIL1D
- SPREADFOOTINGCPT_5__SUBFORM_ZEMINY
- SPREADFOOTINGCPT_5__SUBFORM_PRIRAZENI1D
- SPREADFOOTINGCPT_5__SUBFORM_PATKY_ZALOZENI
- SPREADFOOTINGCPT_5__SUBFORM_SEDZATIZENI
- SPREADFOOTINGCPT_5__SUBFORM_PATKY_GEOMETRIE
- SPREADFOOTINGCPT_5__SUBFORM_MATERIAL
- SPREADFOOTINGCPT_5__SUBFORM_SEDPRITIZENI
- SPREADFOOTINGCPT_5__SUBFORM_NASTAVENIVYPOCTU3
- SPREADFOOTINGCPT_5__SUBFORM_PATKYCPT_1MS
- SPREADFOOTINGCPT_5__SUBFORM_PATKY_2MS
- SPREADFOOTINGCPT_5__SUBFORM_PATKY_DIMENZACE
- 单桩设计软件
- 桩基静力触探分析软件
- 群桩设计软件
- 微型桩设计软件
- 筏基有限元分析软件
- 弹性地基梁分析软件
- 地基固结沉降分析软件
- 隧道开挖地层损失分析软件
- 三维地层建模软件
- 岩土工程有限元分析软件
- 计算书
- 理论
- 理论
- 土体应力
- 土压力
- 挡墙分析
- 土钉边坡支护设计
- 开挖设计
- 竖井设计
- 土质边坡稳定性分析
- 岩质边坡稳定分析
- 加筋土式挡土墙
- 地基承载力分析
- 单桩设计
- 桩基静力触探分析
- 群桩设计
- 微型桩设计
- 原位测试
- 地基固结沉降分析
- 地层损失分析
- 混凝土结构设计
- 混凝土结构设计
- EN 1992-1-1 (EC2) or EN 1992-2
- EN 1992-1-1 (EC2) or EN 1992-2
- Materials, coefficients, notation
- Standard values of coefficients
- Verification of rectangular cross-section made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- EC2_Trhliny
- CSN 73 1201 R
- CSN 73 1201 R
- Materials, coefficients, notation
- Verification of rectangular cross-section made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- CSN 73 6206
- PN-B-03264 : 2002
- PN-B-03264 : 2002
- Materials, coefficients, notation
- Verification of rectangular cross-section made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- BS 8110:1997
- BS 8110:1997
- Materials, coefficients, notation
- Verification of rectangular cross-sections made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- IS 456
- IS 456
- Materials, coefficients, notation
- Verification of cross-sections made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- IS Road Bridges
- ACI 318-11
- ACI 318-11
- Materials, coefficients, notation
- Verification of rectangular cross-section made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- AS 3600 - 2001
- AS 3600 - 2001
- Materials, coefficients, notation
- Verification of rectangular cross-sections made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- SNiP 52-101 - 2003
- SNiP 52-101 - 2003
- Materials, coefficients, notation
- Verification of rectangular cross-sections made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- GB 50010 - 2010
- NZS 3101-2006
- NZS 3101-2006
- Materials, coefficients, notation
- Verification of rectangular cross-sections made from plain concrete
- Verification of rectangular RC cross-section under M, V
- Verification of rectangular RC cross-section under N, M, V
- Verification of circular RC cross-section
- Verification of spread footing for punching shear
- Design of longitudinal reinforcement for plates
- Design of shear reinforcement for plates
- 钢结构截面强度验算
- Timber Cross-Section Verification
- Masonry Cross-Sections Verification
- Plastic Sheet Pile Verification
- 工程设计手册
- 教学课程
- 工程实例手册
- 常见问题
- 软件安装教程
- 软件安装问题
- 软件安装问题
- 问题十三：丢失rtl260.bpl/rtl270.bpl
- 问题十四：Sentinel HASP Run-time installation 运行环境问题
- 问题十五：安装驱动报error: -536870329 的解决方案
- 问题十六：Loadlibrary failed with error 126：找不到指定的模块——解决办法
- 问题十八：修复GEO5
- 问题十七：Error: Licence file is missing or corrupted 无法运行64位GEO5的解决办法
- 问题一：离线安装，无法取消勾选「自动检测更新及安装最新版本」
- 问题二：安装软件更新许可证弹出错误，驱动没有装上
- 问题三：软件安装更新许可证阶段：弹出错误，驱动服务没开启
- 问题四：「错误0x80070641」
- 问题五：无法更改GEO5的安装路径
- 问题六：首次安装GEO5后模块点击无反应，数字签名错误
- 问题七：安装或者更新GEO5CHN 2020弹错：Direct 2D 太旧
- 问题八：安装、更新GEO52020报错：不支持此接口
- 问题九：Win10 2004安装GEO5出现蓝屏
- 问题十：GEO52020 更新时出现 Critical error
- 问题十一：安装或者更新软件过程中弹错：安装路径无法写入
- 问题十二：导入dxf文件出现atioglxx.dll错误
- 软件激活教程
- 软件激活问题
- 问题二十：出现“存在该锁的待定订单”的处理办法
- 软件激活问题
- 问题十八：在线激活按钮为灰，不可用
- 问题十九：您的软件没有使用此功能的配置
- 问题一：在线激活时无法弹出许可证生成页面
- 问题二：在线激活页面打不开
- 问题三：未找到Sentinel锁（H0007）/无法访问Sentinel运行环境（H0033）
- 问题四：加密驱动未安装成功或出现H0042提示
- 问题五：安装加密驱动报错
- 问题六：加密驱动启动不了，找不到系统指定路径
- 问题七：离线激活RUS无法生成V2C
- 问题八：RUS应用V2C文件不成功update failed，并有错误提示
- 问题九：个别模块突然不能正常使用，双击无反应
- 问题十：功能已过期（H0041）
- 问题十一： 发现终端服务（H0027）
- 问题十二：找不到匹配的功能（H0050）
- 问题十三：没有找到有效许可证的key，包括提示IP超限
- 问题十四：安装试用锁不成功，提示缺少Vendor lib文件
- 问题十五：软件激活过程中提示检测到虚拟机
- 问题十六：安装GEO5个人版电脑蓝屏
- 问题十七：无法启动此程序，因为计算机中丢失rtl250.bpl。尝试重新安装此程序以解决此问题。
- 上述未提及的问题
- GEO5 >
- 在线帮助 >
- 理论 >
- 岩质边坡稳定分析 >
- 岩石的抗剪强度准则 >
- 岩石的抗剪强度准则
